Macbooks or iMacs hardly require reinstallation of their Mac OS, but when they do then it’s a fairly difficult process especially if your secondary computer is Windows. Reinstalling Mac OS is a time-consuming process and requires a lot of patience that’s why recommend doing this process in your free time or weekends.

To get started with you require a USB drive with at least 8GB storage (16GB recommended). Then you need a working Mac OS ISO or DMG Installation Image. You can download it from the Apps Store or you can find Mac OS Image at ISORIVER.

Download the new macOS from the App Store. Connect a USB drive to your Mac. Go to Disk Utility. Click the Erase tab, and select Mac OS Extended (Journaled) in the format tab. Clean installing or restoring a Mac offline with USB pen drive. As said earlier, you could use the macOS USB installer to do a clean install or restore it upon a boot failure. Just connect the USB disk and press the Option/Alt Key when you hear the boot sound. The Mac will then display all the startup disks available.

Search macOS name in app store (Mojave, High Serria, EI Capitai). Click 'Get' button to download the installer image on your Mac. The downloaded file will be located in Application folder.
Because, when the installer will update a mac operating system. Then it will remove itself after completion of updates. Therefore, you have to download macOS mojave installer one again from the mac app store. Moreover, To download the macOS Mojave installer follow the steps below. Also remember that it it free and legal to use to install on any.
I have successfully created a macOS Mojave bootable USB from macOS. Then I thought I should back up the partition of the macOS installer and share it with everyone who wants to use it from Windows. I have created two partition image files, the first is Clover Bootloader and the second one is macOS installer.

There are 2 Methods to Create a Bootable USB drive of Mac OS on your Windows PC.

Method 1: Using TransMac

Download TransMac’s latest version for Windows from this link.
Connect your USB drive
Right Click on your USB drive option in TransMac and select Format Disk for Mac
After that, right-click the USB Drive and select Restore with Disk Image
Point to your Mac OS .dmg or .iso file by clicking the add button.
After that TransMac will create bootable Mac OS USB within few minutes.
Then you can insert it into your Mac, hold down the option key while turn on and boot your system with this USB.

Method 2: Using PowerISO

Another disk image utility that you can use is PowerISO. It can be used for burning both ISO files and DMG files to USB to create a bootable drive. Follow the steps below to Create a Bootable Mac OS USB on Windows PC.

Step 1: Firstly Download PowerISO and install it in your Windows PC. Launch the app and insert a USB drive into your computer.

Create A Bootable Mojave Usb

Download repo dependency on kodi. Step 2: Import the DMG / ISO file directly by clicking on ‘Burn’ in the toolbar.

Step 3: In the Burn window, select the DMG / ISO file from the Source File section.

Step 4: You can modify the settings to adjust burn speed. The default will be set to the maximum, so you can reduce that.

Step 5: You can choose to finalize the disk and verify it. Any errors in the bootable USB will show up at that point.

Step 6: Now click on “Burn” and wait for the progress bar to reach 100%.

Create Bootable Usb Os X

After the successful creation of Bootable Mac OS USB, boot your Macbook from this USB drive by clicking the option button during bootup and select this USB drive.

Watch this Video Tutorial

That’s it for the tutorial If you face any issues or had any query then please let us know in the comment section below. You can also send us an email via the contact us page for personalized support.

Mojave is still one of the most popular macOS desktop operating system in late 2020, which occupies around 20% market share of entire macOS. There are still millions of Macs or Hackintosh running Mojave as its primary OS. However, if the computer was crashed or broken, you have to reinstall macOS Mojave on it to solve the problem.

In this post, we will share a detailed tutorial on how to create a macOS Mojave bootable USB installer. At this time, we will use a Windows PC (Windows 10 laptop) as you are unable to get into the Mac. Honestly, it is much easier to create macOS bootable USB on Mac with createinstallmedia command in Terminal. You can refer to Part 6 of this tutorial if you have a Mac to do this.

Part 1: MacOS Mojave Hardware Requirement

If Your Mac was shipped with Mojave in default, then there is no need to check hardware compatibility at this time. For system downgrade or upgrade, you have to make sure your Mac hardware meet the minimal requirement for installing macOS Mojave.

For Mac:

MacBook Pro (Mid 2012 or newer)
MacBook Air (Mid 2012 or newer)
MacBook (Early 2015 or newer)
Mac mini (Late 2012 or newer)
iMac (Late 2012 or newer)
iMac Pro (2017)

However, if you prepared to install macOS Mojave on a Hackintosh, the requirements are different and much complex. You should do your homework more carefully. Below is an overview requirement.

For Hackintosh:

CPU: Intel 8th or 9th Generation
Memory: 4 GB RAM
Storage: 128 GB SSD or HDD.
Motherboard: Compabible with CPU (Asus, MSI Preferred)
Graphics: AMD Radeon Recommended

Part 2: Download macOS Mojave DMG File

macOS Mojave has two types of installation format. One is via Install Mojave App where you can directly download from Mac App Store. This option is not available on Mac with a new version of macOS that is newer than Mojave.

Make Mojave Usb Bootable

The other installation media is via Mojave dmg file, which contacts all the files and boot information for installing macOS Mojave in a compressed structure. However, you need to burn dmg to USB first before it is used as a bootable media. Now, you can download macOS Mojave DMG file the following resources:

Download Link 1: https://archive.org/download/macOS_Mojave.dmg

Download Link 2: https://sundryfiles.com/9tz

Part 3: Create macOS Mojave Bootable USB Installer on Windows 10 PC

You have completed the preparation process in above steps and it is time to create a bootable Mojave USB installer from the download dmg file. Unfortunately, the USB would be bootable if just simply copying the dmg file to USB drive without additional actions because the booting code is not written to USB via file copy. Instead, you should use third-party software to help you create a macOS Mojave USB drive from DMG file.

UUByte DMG Editor is such a tool for burning dmg file to USB drive. It will copy all installation files and write boot information to USB drive as well. After burning, the USB is bootable and can be used as a media to install macOS. The following is the details for creating macOS Mojave bootable USB drive.

Step 1: Click the Download button and save the .exe file on your Windows PC; then double click it to start the installation process.

Step 2: Insert a USB drive into the PC and open DMG Editor software from desktop shortcut. Now, click Next button at the right side of Burn module.

Download Mac Os Mojave From Bootable Usb 3.0

Step 3: Now, you need to import the downloaded Mojave dmg file into the program and choose the USB drive name from drop-down menu.

Step 4: When the preparation is done, click Burn button to start burning macOS Mojave dmg file to target USB device. You have to wait for 5-10 minutes for this.

This is one of most reliable ways to create macOS Mojave bootable USB drive on a Windows PC. You can use DMG Editor on latest Windows 10 as well as Windows 8/7/XP.

Part 4: Install macOS Mojave from USB Drive on Mac

After creating macOS Mojave bootable USB drive, it is the right time to install Mojave on your Mac. If possible, make sure taking a backup of important data on your Mac. The installation process will format the drive and this will delete all your personal data and apps from Mac.

To get started, please connect the USB drive to Mac and power on the computer. Keep pressing the Option key and you see the Startup Manager in a few seconds. Click on the USB drive name with your mouse to enter into installation page. Next, select the internal drive and finally click Continue button to begin the installation process.

Note: For installation on a Hackintosh, you need additional tool to configure the boot loader, such as OpenCore or Clover. After that, plug the USB into Hackintosh and set USB as the first boot device in BIOS. By doing this, you will manage to get into Mojave install wizard.

Download Mac Os Mojave From Bootable Usb Drive

Part 5: Possible Issue and Fix

According to our research, there might be a few issues during this process, which were reported by online users. Below is a list of most common issues you may come across. Please don't be scared as we also share possible fix to help you out!

USB Not Showing up in Startup Manager: If the USB drive burned with DMG Editor did not show up in Startup Manager, it means the burning process failed. The most possible reason is that the dmg file was corrupted, you need to download it from another source and burn it again.

No available drive for installation. Mojave is built with APFS but the old Macs come with HFS or HFS+. You have to boot into macOS Recovery mode and format the drive to APFS with Disk Utility app.

It could be more issues with Hackintosh and we don't have less epxerience on this topic. Please go to Hackintosh blog or forum for more accurate solutions.

Download Mac Os Mojave Bootable Usb

Conclusion

The above are the necessary steps intended to create a macOS Mojave bootable USB on a Windows 10 PC. Please read them carefully, especially the hardware requirement section. You won't be able to install Mojave on a Mac that does not meet its technical specification. You can also send us email if you have issue not being solved by your own.